IN the tuning doc it says to read the max tp value and use this as the max value in the load scale table.
All the screen shots i have seen have tp values found in the load scale table.
However mine shows up as 30 odd thousand?
Is there an error somewhere causing this?
TP Value - 39900???
Moderator: Matt
TP Value - 39900???
- Attachments
-
- bens screen dump.doc
- (131.5 KiB) Downloaded 106 times
ok, i've just had a good play around with the consult log player, which gives me the TP value in brackets which translates into the load table.
well Nistune just gets better!!
I adjusted the load scales and then reran my logs while viewing the fuel/ignition maps, and it actually shows which cells will now be accessed. it takes a lot of guess work out.
So now im ready to retry with the rescaled tables and 3" maf.
this may fix my disconnect at max load too?
well Nistune just gets better!!
I adjusted the load scales and then reran my logs while viewing the fuel/ignition maps, and it actually shows which cells will now be accessed. it takes a lot of guess work out.
So now im ready to retry with the rescaled tables and 3" maf.
this may fix my disconnect at max load too?