lean idle condition on cold starts

that guy · Post by **that guy** » Sat Jul 05, 2008 4:05 am

Nissan/ S13 chassie /Ka24de/Master Power 60-1 .70 compressor Housing 4.5 in. inlet 2.5 in. outlet .48 a/r turbine housing stage 2 wheel /740cc inj. deatchwerks side feed /Z32 maf.
I have a lean cold start condition wanted to know how i could possibly remedy it.

modulation · Post by **modulation** » Sun Jul 06, 2008 4:06 am

that guy wrote:Nissan/ S13 chassie /Ka24de/Master Power 60-1 .70 compressor Housing 4.5 in. inlet 2.5 in. outlet .48 a/r turbine housing stage 2 wheel /740cc inj. deatchwerks side feed /Z32 maf.
I have a lean cold start condition wanted to know how i could possibly remedy it.

Have you looked at the table "cold main enrich" yet ?

that guy · Post by **that guy** » Sun Jul 06, 2008 5:03 am

Good idea!

modulation · Post by **modulation** » Sun Jul 06, 2008 5:34 am

Good luck.
Cold start troubleshooting is a PITA since you only get like 3-4 cold starts a day in the summer (unless you live in Alaska or something.)

Just take your time and increment slowly..

Nistune Forums

lean idle condition on cold starts

lean idle condition on cold starts

Re: lean idle condition on cold starts