vg30e
Posted: Sun Nov 19, 2023 3:12 am
What's up everyone,
After doing some WOT pulls, I was watching some of my logs and noticed my injection time shoots up to about 9 ms when the turbo is beginning to spool, and drops down to about 5 ms when it's in boost. Same with the duty cycle, 50% when spooling but 29% when it's in boost. I’m not sure if this is normal or not.
If you go to 2:10 in the data log you'll see a short pull, the turbo starts spooling at 3000 rpm, and its builds boost at 3100.
After doing some WOT pulls, I was watching some of my logs and noticed my injection time shoots up to about 9 ms when the turbo is beginning to spool, and drops down to about 5 ms when it's in boost. Same with the duty cycle, 50% when spooling but 29% when it's in boost. I’m not sure if this is normal or not.
If you go to 2:10 in the data log you'll see a short pull, the turbo starts spooling at 3000 rpm, and its builds boost at 3100.