What tables to look at when cold start stalls

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
familyhorse
 

Posts: 2
Joined: Wed Apr 13, 2016 2:28 am

What tables to look at when cold start stalls

Post by familyhorse »

I have nistune on my GTR33 with BNR32 ECU, Nismo 555 injectors, R35 AFMs, DW450 fuel pump and fuel pressure set at 3 bar (slightly higher than 2.5 bar of OEM). Everything is fine except when starting cold in the morning, the idle tends to slump and sometime stalls after start. Yet, it will sometimes be fine after struggling for a few seconds, and won't have issue when start after the 1st time. What table(s) in Nistune should I check?

Thanks a lot!!

Ringo
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: What tables to look at when cold start stalls

Post by Matt »

Try crank enrich if problems starting, and then after start enrichment tables
Post Reply