Nistune Forums

Hi,

I'm trying to get nistune to control Fans on my Jap spec S15, but it seems that I cannot get it to go from one temp band to another.

No matter what temperature is only left top cell controls the fan.
On the pic you can see the temperature is 75deg, but still only leftmost cell controls the temp if I change the value to 34. Second cell from the left does nothing no matter what value I set.

Thanks in advance.

Would appreciate some help on this.

Cheers
Kostya

Try setting the temperature range 0,70,75,80,85 and let me know if it gets into the other cells and controls the fans with the flags in those cells?

Hi Matt,

I don't know whether it did anything or not - but I think I figured what the problem was. It just jumped the second cell.

Basically it was staying in the first cell until the temperature reached the 3rd and went there. I haven't had a chance to try switch-off functionality on the cool-down but Im sure it's gonna be fine.