Page 1 of 1
There is no record in the log TP scales
Posted: Wed Sep 16, 2015 4:44 pm
by Bgtym
There is no record in the log TP scales
In tuner mode, it shows the TA scales!
when I try to write the log, automatically switches to the stream. mode stream is no TP monitor scales!
and displays an error
Re: There is no record in the log TP scales
Posted: Thu Sep 17, 2015 12:57 pm
by Matt
Standard ECU without Nistune board will not have TP. Does this have Nistune board fitted?
Open up logger, and then record. Logger will always with to stream mode. You can then switch back to tuner mode
If you have no TP with Nistune board, please do a debug log file and poste here
Re: There is no record in the log TP scales
Posted: Sat Sep 19, 2015 4:06 am
by Bgtym
Matt wrote:Standard ECU without Nistune board will not have TP. Does this have Nistune board fitted?
Open up logger, and then record. Logger will always with to stream mode. You can then switch back to tuner mode
If you have no TP with Nistune board, please do a debug log file and poste here
I updated to version 1.2.51 nistyun.
TP record weights, no!
I use type 2 board
Re: There is no record in the log TP scales
Posted: Sat Sep 19, 2015 4:16 am
by Bgtym
and
Re: There is no record in the log TP scales
Posted: Thu Dec 24, 2015 12:35 pm
by Matt
nistune-0914-1837.log
nistune-0914-1901.log
Need to be connected to consult when taking logs.
Both logs here show no useful information. There is no consult connection in these log files (just appears you are playing back a consult log)
Re: There is no record in the log TP scales
Posted: Thu Dec 24, 2015 12:54 pm
by Matt
Your ECU:
nistune-0918-2100.log
Code: Select all
Found COM5 Prolific USB-to-Serial Comm Port
CSerialSupport:Initialise(): Connecting to COM5
16:01:35.679 Version String:00 01 05 40 00 00 00 1F 80 00 C0 00 00 00 00 30 24 31 31 55 30 46
16:01:35.679 Consult ECU Version: 11U0F
16:01:35.869 EventMangager: CConsultQueue::CONSULT_EVENT_FIND_REGISTERS
16:01:35.869 TX:5A 26
16:01:35.869 RX:A5 FE
16:01:35.869 Register 26 doesn't exist
16:01:35.869 TX:5A 27
16:01:35.879 RX:A5 FE
16:01:35.879 Register 27 doesn't exist
Verison info: 15
16:01:35.889 RX:35 06 00 00 15
My ECU:
Code: Select all
01:47:32.072 TX:5A 26
01:47:32.088 RX:A5 26
01:47:32.088 Register 26 exists
01:47:32.088 TX:5A 27
01:47:32.104 RX:A5 27
01:47:32.104 Register 27 exists
The difference is that your ECU is missing the TP register (26,27) from the board!
Attached is image with consult table showing 00DB/00DC TP address. Yours would have FF,FF here to be reporting this issue
Likely this was caused by uploading the consult table from a standard ECU BIN file (during import of feature pack??). You can fix the table by using the Display > Hex editor and edit the values as displayed in second attachment
Re: There is no record in the log TP scales
Posted: Sat Jul 28, 2018 12:53 am
by bill
Back in the day there was TPLoad logging with stock ecus.
https://www.youtube.com/watch?v=Zjo7RYsQMBM
Re: There is no record in the log TP scales
Posted: Sat Jul 28, 2018 7:17 am
by Matt
Only in tuner mode. Inside Stream Mode the registers 26,27 are empty (from factory) so it is not available until the board is fitted