CA18DET speed limit

ByReaL · Post by **ByReaL** » Tue May 08, 2007 7:40 pm

not shure this is a bug.

i opened the nistune i changed the speed limit to 5 km/h , and i could run my car even with 30-40 km/h with no problem (changed it hited apply button if is any..)

any ideas about how can i set a speed limit?

PS: rev limiter worked

TSL · Post by **TSL** » Wed May 09, 2007 12:42 am

Speed limit value must be a multiple of 2.

So 4 or 6 is acceptable but not 5.

ByReaL · Post by **ByReaL** » Wed May 09, 2007 1:51 am

i'll try again but i do not belive this is the problem , because the value that i see in nistune si not the value that the nistune uploads to ecu, i belive the software divide my value with 2 5/2 = 2.5 and rounded means 2 in uploaded to ecu, so speed limiter is 4 even if i set 5.....

anyway i'll try with an even number to be shure of that

LMQT · Post by **LMQT** » Sun May 27, 2007 6:53 pm

It's not a Nistune bug, but a Nissan bug

Speed limit in CA18DET isn't really read as we can do it in the prog.
You can put whatever you want for the limit, it won't affect at all

The only way I found is to shoot it completely, I can't modify it.
It's easyer with MEC-D022 base (MEC-D009 doesn't seems to work).

Matt · Post by **Matt** » Wed Jun 06, 2007 9:19 pm

if there is more than one limit, might need to change both

I know RPM_LIMIT1/3 and RPM_LIMIT2/4 need to be modified together in order to work

LMQT · Post by **LMQT** » Thu Jun 07, 2007 4:40 am

Matt wrote:if there is more than one limit, might need to change both

I know RPM_LIMIT1/3 and RPM_LIMIT2/4 need to be modified together in order to work

anyway it's not working like that