Page 12 of 12
Re: Feature Pack updates + Information thread
Posted: Sun Jul 19, 2020 9:06 pm
by Matt
FP1.1/FP2.1 next update available
Added vehicles:
S13 CA18DET
VL RB30ET
Z31 VG30ET
Nistune Version Beta 1.3.28 (EXE)
https://www.nistune.com/releases/Nistun ... _setup.exe
Nistune FP 3.0 ROM File Pack Beta 1.1 (EXE)
https://www.nistune.com/releases/Nistun ... ck_1.1.exe
Re: Feature Pack updates + Information thread
Posted: Fri May 14, 2021 6:29 pm
by Matt
Updated documentation and version numbering for current supported FP1.1 / FP2.1 boards. Still trying to get Z32 timer code working (interfered with by CAS timers) for boost control
Re: Feature Pack updates + Information thread
Posted: Fri Dec 10, 2021 9:48 am
by akara
is 1.1 available for all the boards v1 was in addition or or only those three models?
Re: Feature Pack updates + Information thread
Posted: Mon Dec 20, 2021 12:26 pm
by Matt
It is currently only those boards for Type 1, and Z32, BNR32, Y60, HCR32 for Type 2
Type 3 and Type 4 (selected models) needed some further updates for flat shift, and currently in testing
Re: Feature Pack updates + Information thread
Posted: Mon Apr 11, 2022 10:20 pm
by Matt
Nistune Version Beta 1.3.39 (EXE)
https://www.nistune.com/releases/Nistun ... _setup.exe
Nistune FP 3.0 ROM File Pack 2.13 [FP2 Version 1.3] (EXE)
https://www.nistune.com/releases/Nistun ... k_2.13.exe
Released 11 Apr 2022
- Adds FP1.1 for B13 SR20DE, P10 SR20DE, RNN14 SR20DET, S13 SR20DE, S13 KA24DE, S13 SR20DET, S14 SR20DET, S14A SR20DET, S15 SR20DET
Adds
- Flat shift
- Updated launch control (activated whilst button pressed only)
- Anti stall (Limit TP on throttle release)
- Crank voltage adjustment (low battery, add more injection)
Re: Feature Pack updates + Information thread
Posted: Sat Sep 10, 2022 1:06 pm
by Matt
There has been an update to the FP ROM pack today for FP1.1 for Z32 300ZX. Rev limits and launch control cuts were reported not working and I've rebuilt with the latest patch code and retested today
Re: Feature Pack updates + Information thread
Posted: Wed Nov 30, 2022 3:51 am
by Black300zx
Matt wrote: ↑Sat Sep 10, 2022 1:06 pm
There has been an update to the FP ROM pack today for FP1.1 for Z32 300ZX. Rev limits and launch control cuts were reported not working and I've rebuilt with the latest patch code and retested today
Hi Matt,
I'm a new Nistune user and have about 1 week under my belt learning Nistune on my 300zx. I noticed the rev limits weren't working and found this post after a bit of searching.
What do I need to do to apply the fixed ROM? My current tune is the base 300ZX TT/MT with some fuel adjustments and some RPM/TP scale adjustments. Do I need to load the corrected ROM and copy my changes into it, or is there an easier way to "fix" my current .bin file to make the rev limits work?
Re: Feature Pack updates + Information thread
Posted: Thu Dec 29, 2022 1:32 pm
by Matt
Unfortunately if it is 47P1H (only Z32 part affected) the board will need a reflash to the version released 14 October 2022
Try contacting CZP for the update. They can invoice me for the time if required
Re: Feature Pack updates + Information thread
Posted: Fri Dec 30, 2022 4:01 am
by Black300zx
Thanks for the response and email Matt- much appreciated!
The Z is down for the winter, so perfect time to send it back to CZP. I need to place an order anyway
![Wink ;)](./images/smilies/icon_wink.gif)
Re: Feature Pack updates + Information thread
Posted: Fri Dec 30, 2022 4:01 am
by Black300zx
Thanks for the response and email Matt- much appreciated!
The Z is down for the winter, so perfect time to send it back to CZP. I need to place an order anyway
![Wink ;)](./images/smilies/icon_wink.gif)