RB25DE+T tune
Moderator: Matt
RB25DE+T tune
Hi, i am looking for someone that can get me a RB25DE+T tune for a r33 series 1 running on a R32 ecu. What is the best fix for the TPS idle signals for these?
Re: RB25DE+T tune
You need to use the ECR33_RB25\HCR32_for_RB25... base file in the Type 2 board. This has the firmware tweak to allow usage of the variable voltage input in absense of the TPS idle switch
I doubt anyone here has an RB25DE+T tune however since all tuning we normally do is for RB25DET low compression. Use the RB25DET as a start but will need to pull out fair a bit of timing going on boost
I doubt anyone here has an RB25DE+T tune however since all tuning we normally do is for RB25DET low compression. Use the RB25DET as a start but will need to pull out fair a bit of timing going on boost