Page 2 of 2
Re: Need a stock ROM for a euro CA18DE
Posted: Sat May 16, 2020 9:55 pm
by Matt
28 pin with the sticker on both
Re: Need a stock ROM for a euro CA18DE
Posted: Tue May 26, 2020 7:16 am
by martinb12gti
Hello Matt
This is the original bin from my sunny.
But my car is not in the vehicle list.
When i choose the N13 sentra\sunny\pulsar from the vehicle list only the first three maps will not showing right.
ECU part number ist 23710-82A60
Regards
Re: Need a stock ROM for a euro CA18DE
Posted: Tue May 26, 2020 3:35 pm
by Matt
This is because this vehicle is not supported in Nistune. I've never some across this one. Can have a quick look but I won't add board support for it
Re: Need a stock ROM for a euro CA18DE
Posted: Wed May 27, 2020 9:45 pm
by martinb12gti
I don't need board support for this, i only want to read the original EEPROM to compare the maps with my actual setup.
Many thanks for your help Matt.
Regards
Re: Need a stock ROM for a euro CA18DE
Posted: Sat May 30, 2020 10:17 pm
by Matt
Okay had a look through this and similar files
Load the KN13 CA16DE address file selection (vehicle select) and then load this file
Everything will display fine, except the fuel map in the graphic display... on that one press enter and then +16 to the fuel map to see kind of what it should look like. It seems to have some offset applied to it
Re: Need a stock ROM for a euro CA18DE
Posted: Tue Jun 02, 2020 7:49 pm
by martinb12gti
Many many thanks Matt, this helps me a lot.
Regards Martin