Page 1 of 2
AEM works in Nistune but innovate doesn't?
Posted: Wed Jun 22, 2011 2:32 pm
by nissangts
I have both the AEM UEGO and the innovate MTXL. I am able to get the AEM to work with NIStune however I can't the MTXL to work with Nistune.
I can get it working with logworks however. I am using an omega serial to usb converter. I am also 0.9.22.10. Please any help would be greatly appreciated.
Re: AEM works in Nistune but innovate doesn't?
Posted: Wed Jun 22, 2011 5:30 pm
by bachig24u
I think you have a version that is in the future somehow.
try either of these 0.10.5 or 0.9.14.22
Re: AEM works in Nistune but innovate doesn't?
Posted: Wed Jun 22, 2011 6:06 pm
by Matt
try on 0.10.5 as I've been running LC-1 on this version for last few weeks in the vehicle
Re: AEM works in Nistune but innovate doesn't?
Posted: Wed Jun 22, 2011 11:56 pm
by nissangts
Matt wrote:try on 0.10.5 as I've been running LC-1 on this version for last few weeks in the vehicle
I guess I will have to do that Matt thanks. However has there been an issue with 9.22.14 not being able to work with nistune?
Matt do you think it could have something to do with the version of innovate MTS in .9.22.14?
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 11:41 am
by nissangts
Hi Matt it upgraded to 10.5 and still can't get it to work
I tried to upload screen shots but don't know.
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 2:41 pm
by Matt
Looks like its connected to the wideband but not picking up any sensor information to display
Are you able to do a debug log (File-Configuration-Debug logging) so I can see what sensor information it is receiving from that particular unit?
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 3:39 pm
by nissangts
Matt wrote:Looks like its connected to the wideband but not picking up any sensor information to display
[b]Are you able to do a debug log (File-Configuration-Debug logging) so I can see what sensor information it is receiving from that particular unit?[/b]
I will try to get the debug file to you asap.
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 4:08 pm
by nissangts
Hi Matt here are the debug logs you requested.
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 10:51 pm
by nissangts
Any word Matt
?
Re: AEM works in Nistune but innovate doesn't?
Posted: Thu Jun 23, 2011 11:30 pm
by Matt
geez four hours and already bumping the thread!
will have a look at these tomorrow evening
Re: AEM works in Nistune but innovate doesn't?
Posted: Fri Jun 24, 2011 12:08 am
by nissangts
Matt wrote:geez four hours and already bumping the thread!
will have a look at these tomorrow evening
Sorry didn't mean to offend
Re: AEM works in Nistune but innovate doesn't?
Posted: Fri Jun 24, 2011 10:38 am
by Matt
not offended. I have a fairly high workload so normally it can take several days to find time to investigate issues raised here or in emails. Usually middle of the week is peak workload in regards to emails, enquiries, ordering, packaging, programming testing etc but end of the week normally frees up to work on software/firmware and identify and resolve issues
Re: AEM works in Nistune but innovate doesn't?
Posted: Sat Jun 25, 2011 3:10 am
by nissangts
Matt do you think that a different mts file would help? I read a thread on here that spoke about using log works 2 and some dlls to get the lm2 to work i think. I wonder if that is the same issue i am having? I am so lost with this issue
.
Re: AEM works in Nistune but innovate doesn't?
Posted: Sat Jun 25, 2011 7:34 pm
by Matt
The one we supply in the install package will work
Re: AEM works in Nistune but innovate doesn't?
Posted: Tue Jun 28, 2011 6:16 am
by nissangts
Hi Matt still no luck?