Nistune Forums

Matt, I experience connection problems with 0.9.14.9b version on Z32 ECU's with T2 boards installed.

problem description:
Software has problems with the initial connect to the ECU.
Conzult (and others) work fine and connect at the first try.
Once conzult has made the connection and then you try to make the connection with Nistune it works, but often it disconnects after a while.
Reconnecting fails, even after resetting the ECU.

Version 0.9.14.2 works fine and doesn't seem to have this problem

-Eric

okay problem noted. not sure what has changed there but will check it out. I dont have issues with connecting on the bench with the latest version and Z32 ECUs

Particular vehicle or all ECUs? Can you get me a debug log at all?

Tried this tonight with 0.9.14.10b and cannot make the problem happen

Z32 ECU with 41P04 loaded

Tried restarting Nistune, loaded Z32 address file then connect in stream mode

Then tried tuner mode and both times connect okay

Let me know if still an issue