lightning maf vq map

Discuss possible software enhancements/changes here.

Moderator: Matt

Post Reply
Bernardd
 

Posts: 253
Joined: Thu Jan 26, 2006 3:20 am

lightning maf vq map

Post by Bernardd »

see attached. i saved it as the z32 maf vq to make it work easily in romeditor. jeff priddy's car was reading around 4.7vdc at 490rwhp. it's rated to be good to 600whp.

bernard
Attachments
z32_vq_map.bin
(128 Bytes) Downloaded 269 times
Matt
Site Admin
 

Posts: 8990
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

excellent. i'll add it to the VQ definitions list in NIStune.
Matt
Site Admin
 

Posts: 8990
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

what K const did he end up using with this?
Bernardd
 

Posts: 253
Joined: Thu Jan 26, 2006 3:20 am

Post by Bernardd »

A9 with 72 # injectors
RB30-POWER
 

Posts: 62
Joined: Fri Jul 20, 2007 4:43 pm

Post by RB30-POWER »

i see reference to a 80mm and 90mm lightning maf available on the net, what specific maf sensor is this vq map to suit?

we don't have those over here so not familiar with them sorry.
Bernardd
 

Posts: 253
Joined: Thu Jan 26, 2006 3:20 am

Post by Bernardd »

90mm
LMQT
 

Posts: 41
Joined: Sat Apr 28, 2007 3:51 am

Post by LMQT »

Can someone explain me what "lightning MAF" means please ? :(
200SX RS13 Zenki (w. CA18DET)
280hp & 330Nm @ 16PSI (GT25R)
Nistune type 1 rev3a
iaredam
 

Posts: 34
Joined: Wed Nov 21, 2007 9:54 am

Post by iaredam »

LMQT wrote:Can someone explain me what "lightning MAF" means please ? :(
Mass Air Flow sensor from a Ford Lightning Truck
LMQT
 

Posts: 41
Joined: Sat Apr 28, 2007 3:51 am

Post by LMQT »

iaredam wrote:
LMQT wrote:Can someone explain me what "lightning MAF" means please ? :(
Mass Air Flow sensor from a Ford Lightning Truck
Thanks.
Ford Lightning doesn't exists in France, so guess was difficult :lol:

Is there a part number for this MAF please ?
200SX RS13 Zenki (w. CA18DET)
280hp & 330Nm @ 16PSI (GT25R)
Nistune type 1 rev3a
Vetal
 

Posts: 128
Joined: Tue Jun 26, 2007 10:39 pm

Post by Vetal »

guess it won't read anything at idle on our tiny motors :)
iaredam
 

Posts: 34
Joined: Wed Nov 21, 2007 9:54 am

Post by iaredam »

LMQT wrote:Is there a part number for this MAF please ?
http://www.corral.net/forums/showpost.p ... stcount=14


80mm = XL3F-12B579-AA
90mm = 1L3Z-12B579-AA (might be 1L3Z-12B5579AA)
Post Reply