a32 maxima issues
Moderator: Matt
Re: a32 maxima issues
Further update the TTP_MIN for 1996 is not available (nor similar code for R34) so similar to S14 KA24DE this table was removed in later ECU versions (1995 onwards)
-
- Posts: 1
- Joined: Thu Oct 09, 2014 1:53 pm
Re: a32 maxima issues
Thanks for clearing everything up Mat. Once I'm done with my 3.5 swap I will post results using Nistune. Things didn't work out so well using Greddy Emanage Ultimate.
-
- Posts: 23
- Joined: Fri Nov 14, 2014 1:01 pm
- Location: NY
- Contact:
Re: a32 maxima issues
Is 2 step in the works, Matt?
Re: a32 maxima issues
Since developing the Type 4 dual bank boards earlier this year, I have only sold 18 units myself. The initial ones were provided at significant discount for testing purposes, and after this interest has dwindled. So far the time and money to develop, test and produce these boards has not had the same returns as earlier models.
I've had a few people ask me about extra features for Maxima. Given I've old sold a small amount of units for this model I cannot justify spending too much extra effort/time for only a small number of vehicles
Realistically I need to sell more boards to make up for the investment spent on each model to justify the work, since I am not charging for the firmware updates themselves. So I'm only doing the changes on the models with the most interest at this point.
I've had a few people ask me about extra features for Maxima. Given I've old sold a small amount of units for this model I cannot justify spending too much extra effort/time for only a small number of vehicles
Realistically I need to sell more boards to make up for the investment spent on each model to justify the work, since I am not charging for the firmware updates themselves. So I'm only doing the changes on the models with the most interest at this point.
-
- Posts: 23
- Joined: Fri Nov 14, 2014 1:01 pm
- Location: NY
- Contact:
Re: a32 maxima issues
I've been trying to lead people towards Nistune and will continue to do so. I hope one day that feature can be added.
Hopefully a YouTube video/review by me will help.
Hopefully a YouTube video/review by me will help.
-
- Posts: 23
- Joined: Fri Nov 14, 2014 1:01 pm
- Location: NY
- Contact:
Re: a32 maxima issues
I got my ECU installed and software is working great.
I raised the limiter, went to burn it and the car bogged out and almost shut off. I turned it off, waited ten seconds and restarted the car to find quite a few fault codes. I reset them and they haven't come back (yet).
My questions are, will that happen every time I burn what changes I made? And will those fault codes come back?
I raised the limiter, went to burn it and the car bogged out and almost shut off. I turned it off, waited ten seconds and restarted the car to find quite a few fault codes. I reset them and they haven't come back (yet).
My questions are, will that happen every time I burn what changes I made? And will those fault codes come back?
Re: a32 maxima issues
With the later vehicles, you need to make sure the vehicle is not running when burning the image (affected vehicles A32 VQ30DE, S14 KA24DE 1996, Z32 VG30DETT 1996, Y33 VQ30DE)
After burning the image, shut down the car for 10 seconds to reset. The ECU does not react well to having a time out from processing during the burn stage. Having the vehicle not running avoids any problems
This is why we have the reset message added to the software. If you are not running the vehicle during burn then it should not raise fault codes
After burning the image, shut down the car for 10 seconds to reset. The ECU does not react well to having a time out from processing during the burn stage. Having the vehicle not running avoids any problems
This is why we have the reset message added to the software. If you are not running the vehicle during burn then it should not raise fault codes
-
- Posts: 23
- Joined: Fri Nov 14, 2014 1:01 pm
- Location: NY
- Contact:
Re: a32 maxima issues
So after making changes, shut off the car, turn key to on position then burn?
EDIT: Or as soon as I press burn, shut off the vehicle for ten seconds?
EDIT: Or as soon as I press burn, shut off the vehicle for ten seconds?
Re: a32 maxima issues
I recommend:
1. shut the car off. Wait 10 seconds
2. reconnect upload tune
3. burn
4. shut car off again and wait 10 seconds
Proceed as normal. This way there will be no issues related to pausing the ECU whilst running or causing corruption (which can happen if not shutting the car off after burn)
1. shut the car off. Wait 10 seconds
2. reconnect upload tune
3. burn
4. shut car off again and wait 10 seconds
Proceed as normal. This way there will be no issues related to pausing the ECU whilst running or causing corruption (which can happen if not shutting the car off after burn)