Pick your workshops carefully - dodgy roll cages

If you know what B.S. stands for you know what goes here.

Moderator: Matt

Post Reply
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Pick your workshops carefully - dodgy roll cages

Post by skyline_stu »

Here's a quick look at why you should consider picking your fabrication shops with some care - especially critical safety item like roll cages !! It's not the bits you can see that are the problems

http://www.motorsports-group-sucks.com/

He's lucky that he never crashed at high speed, as I suspect some of the welds would have well and truely fallen to pieces...
bachig24u
 

Posts: 678
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

Re: Pick your workshops carefully - dodgy roll cages

Post by bachig24u »

I've seen our ANDRA officials comb carefully over our prebuild welds and stamps for tube marking etc.

I really hope it's one shop in the USA taking cheap shots at another and not really a true story.
Surely nobody could weld that badly or even cut tube with such inaccuracy that many times over.
Post Reply