Need ECU Pin picture!

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
1SIKZ31
 

Posts: 79
Joined: Thu May 24, 2007 4:15 pm
Location: Dallas, TX

Need ECU Pin picture!

Post by 1SIKZ31 »

Matt or anyone, I need a 87 Turbo 300zx ECU "pin/wiring picture", I dont know how to describe it.
Matt you sent one to firehawk but sent the R31 and not the Z31 lol.

I need a Z31 ECU connector wiring diagram, its a picture showing what wire going out of the ecu goes to what, dangit i cant explain it correctly but I hope you know what I mean...lol. :roll:

Email is bobaktxl@gmail.com if anyone going to send it to me, or just post up the picture here...

Matt i need this diagram because me and firehawk couldnt figure out which pin was for the +12v power source for the ECU, because we had the wrong diagram (r31, it had 4 connectors, Z31 has only 3) :arrow:
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Post by Matt »

The CR31 / Z31 ECUs are identical (3 plugs)

The HR31 ECU just has an extra plug for multicoil ignition. Ignore this plug and the rest of the diagram applies to Z31

I wired against this on my test bench, so can confirm it works!
Top
Post Reply

Return to “General Nistune Discussion”