Phantom load cut - r32 gtr

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
Jeffworld2
 

Posts: 8
Joined: Tue Mar 12, 2019 5:04 pm

Phantom load cut - r32 gtr

Post by Jeffworld2 »

Hi all

I have attached a .bin and log, where at around 12seconds you can see something I am chasing an explanation for.

I hit load (tp) cut at around 3200rpm, despite all values in there at 255. It does not seem to affect mixtures but lights up red on the left. Is this due to scaling changes making tp over the 255? Is that 255 directly the tp(index) or just a value?

I am trying to sort out the tune as its not where I want it but don't want to be chasing my tail.

Any help appreciated
Attachments
fuel map rev3.bin
(32 KiB) Downloaded 63 times
Nistune_25.csv
(290.43 KiB) Downloaded 62 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Phantom load cut - r32 gtr

Post by Matt »

I'm not seeing any cut at 12:00 or 3200rpm

At 13:96 I can see the fuel being limited, and leaning out however, probably due to the TP max table should be higher (set that to 255)

Increase that table and let me know. Unless I'm missing something else (see attached screenshot)
Attachments
2020-06-01 12_18_45-Window BNR32_Cut.png
(129.4 KiB) Downloaded 704 times
Jeffworld2
 

Posts: 8
Joined: Tue Mar 12, 2019 5:04 pm

Re: Phantom load cut - r32 gtr

Post by Jeffworld2 »

Still hits.jpg
(346.79 KiB) Downloaded 703 times
I had spotted that and changed to 255 from 2400, still similar. Attached screenshot from another log that was too long to post up.

Fuel table is not perfect yet.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Phantom load cut - r32 gtr

Post by Matt »

Can you ZIP and post the log, and let me know the timestamp? I'll have another look. Can't figure it from the screenshot
Post Reply