Load limit

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
tomkun
 

Posts: 8
Joined: Sat Feb 09, 2019 12:16 pm

Load limit

Post by tomkun »

Hey so I been having problems with my rb25 s1 swapped in a s14. Sometimes when I get into boost its hesitates and seems like the ecu is cutting it off for some reason. I'm currently on the stock tune still, with basic bolt on and using a rb20 maf.
Attachments
stock map from ecu.bin
(32 KiB) Downloaded 38 times
NIStune_2019-03-14_1705_31.csv
(132.41 KiB) Downloaded 39 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Load limit

Post by Matt »

You have transplanted the engine. There is no speed signal to the ECU (always 0). So it's using safety rev/load limits. Increase these to fix the problem
tomkun
 

Posts: 8
Joined: Sat Feb 09, 2019 12:16 pm

Re: Load limit

Post by tomkun »

Matt wrote:You have transplanted the engine. There is no speed signal to the ECU (always 0). So it's using safety rev/load limits. Increase these to fix the problem
Would I just increase the Speed limit 1 in the limit section or the other limits also?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Load limit

Post by Matt »

Just the ones I have told you

Also Nistune 1.3 will tell you what limits. There is no point changing the speed limit, since you have no speed input
Post Reply