ecu max load

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
tomkun
 

Posts: 8
Joined: Sat Feb 09, 2019 12:16 pm

ecu max load

Post by tomkun »

Hey so this is my first time starting my engine since i performed the swap. I decided to go ahead and flash a stock map and monitor stuff. I tried giving it some throttle and i noticed it was acting weird anything about 2000 rpm. I got a caution warning on nistune saying ecu load maxed reached. Here's a screenshot of the max load. One thing to note was that I did not have the stock 02 sensor in, as I'm still waiting for that to come in the mail.

Also wanted to mention that the throttle was registering 1.12 when it was closed and 4.78 when i pressed in the pedal.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: ecu max load

Post by Matt »

No screenshot? Tune and log would be helpful
tomkun
 

Posts: 8
Joined: Sat Feb 09, 2019 12:16 pm

Re: ecu max load

Post by tomkun »

Here is a log i took, at idle its around 10.3 afr and when i try to rev it, it wouldnt go pass 2500(around there).
Attachments
Z32_FOR_RB25DET_41P03_MT_v5_FP_maps.bin
(32 KiB) Downloaded 45 times
NIStune_2019-03-02_1326_06.csv
(10.63 KiB) Downloaded 44 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: ecu max load

Post by Matt »

Well your MAF voltage is stuck on 0.5V all the way through. Might want to check that out first
tomkun
 

Posts: 8
Joined: Sat Feb 09, 2019 12:16 pm

Re: ecu max load

Post by tomkun »

Matt wrote:Well your MAF voltage is stuck on 0.5V all the way through. Might want to check that out first
Turns out it was a maf issue, the wiring harness that came with my swap was pinned for speed density, moving 2 pins solved my problem, now I just have to find out what’s causing my missing issue at idle.
Post Reply