K-konst and Latency for Rb25DET on Z32 ECU

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
Peace
Posts: 60
Joined: Tue Sep 15, 2009 8:03 pm
Contact:

K-konst and Latency for Rb25DET on Z32 ECU

Post by Peace » Mon Feb 01, 2010 1:25 am

Hello.
Who got a good runing setup of this?
All images including default got INjector multiplier around 46k inside.
Having such K-const resulting of having etreamly rich.
What i got for now is K-const of 170. But its hard to get idle at 14.7 for this.

Also i'm curious about injector latency. It's set at 720 for now but in provided on board it's 520. Which is correct?

At 520 idling better then on 720.

Can someone provide me a bin from a good runing Rb25DET on stock injectors. Even if its not on the stock AFM.

BlueRB240
Posts: 232
Joined: Sat Sep 29, 2007 1:27 am
Location: Moreno Valley,Ca
Contact:

.....

Post by BlueRB240 » Tue Feb 02, 2010 1:56 pm

RB20 ecu? or Z32 ecu?

Peace
Posts: 60
Joined: Tue Sep 15, 2009 8:03 pm
Contact:

Post by Peace » Tue Feb 02, 2010 2:30 pm

Z32 ECU

BlueRB240
Posts: 232
Joined: Sat Sep 29, 2007 1:27 am
Location: Moreno Valley,Ca
Contact:

................

Post by BlueRB240 » Tue Feb 02, 2010 2:52 pm

I'll try someone else might jump in if we keep batting idea's back and forth here. Did u use a RB25DET address file or was it a Z32 address file?

since it's running richer try and slide the injecton multiplier bar to the left with auto checked at the bottom and watch your A/F ratio till you get close to 14.7 and adjust the latency next.

Peace
Posts: 60
Joined: Tue Sep 15, 2009 8:03 pm
Contact:

Post by Peace » Tue Feb 02, 2010 3:04 pm

I'm using Z32 address file since its Z32 ecu.

I found value on wich AFR is good. Bu its way far from original 43k.

I'm managed to get idle afr arouond 14 at 172 injector multiplier...

I guess something is really wierd because i'm runing completley stock RB25 and on stock map its completle messed.

Can someone post working map from stock or near RB25DET on Z32 ECU?

BlueRB240
Posts: 232
Joined: Sat Sep 29, 2007 1:27 am
Location: Moreno Valley,Ca
Contact:

.....

Post by BlueRB240 » Mon Feb 22, 2010 5:45 pm

Bump any luck?

Peace
Posts: 60
Joined: Tue Sep 15, 2009 8:03 pm
Contact:

Post by Peace » Mon Feb 22, 2010 6:58 pm

SO far i'm using 172 K-const and 750 latency. Check my other thread about timing also. I got some kind of wierd setup.

Maca
Posts: 5
Joined: Sun Feb 03, 2019 4:45 pm

Re: K-konst and Latency for Rb25DET on Z32 ECU

Post by Maca » Wed Apr 03, 2019 9:48 pm

Whats the ecu part number

Post Reply