TTP Max Reached

[nitrous00]

Hi everyone, I'm getting a "ttp max reached increase table values" message in the ECU status box. I've checked my max load tp tables but not too sure what to change. I've got lots of experience tuning carbs (webers, holleys, and su's) but fairly new to efi tuning. The engine is an rb30 in a patrol, 30/76 turbo, 256cc injectors, std afm before the turbo and running the carby camshaft that is designed for low down torque. It makes 12psi by 3800rpm but runs fat at around 9-10 afr's under boost, cruise and idle conditions are good. Any advice would be appreciated.

[Matt]

Normally click on the link and it will open the window for you

This is the one: