Need a stock ROM for a euro CA18DE

Nistune topics specific to the 6802 cpu

Moderator: Matt

Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Need a stock ROM for a euro CA18DE

Post by Matt »

28 pin with the sticker on both
martinb12gti
 

Posts: 16
Joined: Fri Apr 12, 2013 11:28 pm

Re: Need a stock ROM for a euro CA18DE

Post by martinb12gti »

Hello Matt

This is the original bin from my sunny.
But my car is not in the vehicle list.
When i choose the N13 sentra\sunny\pulsar from the vehicle list only the first three maps will not showing right.

ECU part number ist 23710-82A60

Regards
Attachments
EURO_CA18DE_Sunny_B12_GTI_27C128.bin
(16 KiB) Downloaded 85 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Need a stock ROM for a euro CA18DE

Post by Matt »

This is because this vehicle is not supported in Nistune. I've never some across this one. Can have a quick look but I won't add board support for it
martinb12gti
 

Posts: 16
Joined: Fri Apr 12, 2013 11:28 pm

Re: Need a stock ROM for a euro CA18DE

Post by martinb12gti »

I don't need board support for this, i only want to read the original EEPROM to compare the maps with my actual setup.
Many thanks for your help Matt.

Regards
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Need a stock ROM for a euro CA18DE

Post by Matt »

Okay had a look through this and similar files

Load the KN13 CA16DE address file selection (vehicle select) and then load this file

Everything will display fine, except the fuel map in the graphic display... on that one press enter and then +16 to the fuel map to see kind of what it should look like. It seems to have some offset applied to it
martinb12gti
 

Posts: 16
Joined: Fri Apr 12, 2013 11:28 pm

Re: Need a stock ROM for a euro CA18DE

Post by martinb12gti »

Many many thanks Matt, this helps me a lot.

Regards Martin
Post Reply