Z31 86 FP1 timing

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
bsdkllr
Posts: 56
Joined: Wed Mar 09, 2016 5:32 am
Location: Boston, MA

Z31 86 FP1 timing

Post by bsdkllr » Sat Aug 14, 2021 5:31 am

I have noticed that my consult view and my timing map do not align correctly. the consult view is showing 59 degrees but the map has 50 max. it does show that its higher than the map shows depending on the average of the cells.

I'm guessing its not supposed to be higher than the highest cell in the cluster of 4? and it might sometimes be lower than the lowest too. not sure on that one yet.

Matt
Site Admin
Posts: 8755
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Z31 86 FP1 timing

Post by Matt » Sat Aug 14, 2021 4:31 pm

They should line up, but other factors such as deceleration may come into play. As usual, a log of the issue and BIN file with the actual timing helps to look into the problem, so I can play it back and see where it is accessing

Post Reply