I wish to add a VQ definition to the software, data provided

Discuss possible software enhancements/changes here.

Moderator: Matt

Post Reply
sr20truck
 

Posts: 28
Joined: Tue Apr 28, 2009 11:28 am
Location: St Louis, Missouri
Contact:

I wish to add a VQ definition to the software, data provided

Post by sr20truck »

This is for the 2001.5 Nissan Pathfinder R50 chassis MAFS.
Half year denotes the engine change from the 3.3 distributor engine to the well known 3.5 liter VQ35DE engine.
This is a 3 inch tube design.
I was able to dump the rom from the vehicle with nisprog and a 409.1 cable. Then I began using WinOLS to help define maps.
This was my finding.
I do not understand how to create a VQ bin file in Nistune so I've attached a picture showing the relevant data as displayed in Romraider.
I found that Nistune already has a Pathfinder VQ map but it is from a 1992 vehicle.
So here is one from a newer Pathfinder!
Attachments
VQ35DE Mafs.png
(45.52 KiB) Downloaded 704 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: I wish to add a VQ definition to the software, data provided

Post by Matt »

Are you able to copy/paste those cells in ROM raider into another post? I can then paste into Nistune

Another way is to copy, and then open the VQ map in Nistune and paste (at first cell). Should work. Then save the BIN file and I can import it that way

I've been looking through some of the later model ECU dumps (using Nisprog etc) but there is a lot in there. Decoded some of it but have put that on hold for a while now.
sr20truck
 

Posts: 28
Joined: Tue Apr 28, 2009 11:28 am
Location: St Louis, Missouri
Contact:

Re: I wish to add a VQ definition to the software, data provided

Post by sr20truck »

[Table2D]
0.0 0.08 .16 .24 .32 .40 .48 .56 .64 .72 .80 .88 .96 1.04 1.12 1.20 1.28 1.36 1.44 1.52 1.60 1.68 1.76 1.84 1.92 2.00 2.08 2.16 2.24 2.32 2.40 2.48 2.56 2.64 2.72 2.80 2.88 2.96 3.04 3.12 3.20 3.28 3.36 3.44 3.52 3.60 3.68 3.76 3.84 3.92 4.00 4.08 4.16 4.24 4.32 4.40 4.48 4.56 4.64 4.72 4.80 4.88 4.96 5.04
0.0 417.0 668.0 937.0 1204.0 1461.0 1695.0 1917.0 2125.0 2311.0 2478.0 2639.0 2831.0 3015.0 3204.0 3373.0 3535.0 3712.0 3910.0 4127.0 4355.0 4607.0 4868.0 5152.0 5467.0 5778.0 6131.0 6488.0 6859.0 7291.0 7764.0 8270.0 8809.0 9371.0 9965.0 10619.0 11315.0 12038.0 12863.0 13702.0 14577.0 15532.0 16625.0 17708.0 18865.0 20099.0 21445.0 22889.0 24436.0 26118.0 28003.0 29929.0 31909.0 34089.0 36414.0 39009.0 41668.0 44492.0 47396.0 50334.0 53306.0 56313.0 59353.0 62427.0
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: I wish to add a VQ definition to the software, data provided

Post by Matt »

I've copied the text to a file, opened in Excel (space delimited) and copy/paste that into Nistune VQ map, then copied the BIN (hex) out from it into the VQ map file

Attached the files (ZIP for the VQ Map folder)
Attachments
VQ Maps.zip
(1.5 KiB) Downloaded 60 times
R50 MAF 2020-12-31 07_26_33-Window.png
(20.91 KiB) Downloaded 664 times
Post Reply