Lock Timing

Discuss possible software enhancements/changes here.

Moderator: Matt

Post Reply
Smity42
 

Posts: 11
Joined: Thu Jan 27, 2011 7:39 pm

Lock Timing

Post by Smity42 »

Hi Matt,

It would be good if there was a way to lock the timing to a specific value (e.g. 15 degress) so that it can be checked with a timing light.

I tried using the Active Tests - Base Timing option to do this, but it did not seem to do anything (RB30E ECU).

Cheers,

Martin
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Lock Timing

Post by Matt »

This function is only available with Nissan consult ECUs

Earlier Type 1 ECUs will push out consult data, but active tests is not available (and will not be) for these models

I suggest follow the factory service manual, disconnect TPS sensor with coolant temp around 80 degC and it should sit on the 15 deg BDTC cell on the timing map
Smity42
 

Posts: 11
Joined: Thu Jan 27, 2011 7:39 pm

Re: Lock Timing

Post by Smity42 »

Ahh, that explains it. Thanks Matt.
Post Reply