Lock Timing

Discuss possible software enhancements/changes here.

Moderator: Matt

Post Reply
Smity42
Posts: 11
Joined: Thu Jan 27, 2011 7:39 pm

Lock Timing

Post by Smity42 » Mon Sep 19, 2016 8:51 am

Hi Matt,

It would be good if there was a way to lock the timing to a specific value (e.g. 15 degress) so that it can be checked with a timing light.

I tried using the Active Tests - Base Timing option to do this, but it did not seem to do anything (RB30E ECU).

Cheers,

Martin

Matt
Site Admin
Posts: 8600
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Lock Timing

Post by Matt » Tue Sep 20, 2016 9:13 am

This function is only available with Nissan consult ECUs

Earlier Type 1 ECUs will push out consult data, but active tests is not available (and will not be) for these models

I suggest follow the factory service manual, disconnect TPS sensor with coolant temp around 80 degC and it should sit on the 15 deg BDTC cell on the timing map

Smity42
Posts: 11
Joined: Thu Jan 27, 2011 7:39 pm

Re: Lock Timing

Post by Smity42 » Tue Sep 20, 2016 11:36 am

Ahh, that explains it. Thanks Matt.

Post Reply