Page 1 of 1

Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Wed Jan 02, 2019 4:53 pm
by mike2016
Type-2 board
Car - BNR32 RB26
Laptop - Lenovo X1 / Windows 10 Pro
Wideband - Innonvate LM-2
Nistune and LM-2 are connected to laptop with their own USB ports.


When Auto AFR window or AFR grapher is open, wideband reading will freeze in Nistune, but it's still reporting "wideband connected".
If I click "disconnect" button, the message "Disconnecting from wideband....." stays and won't go away.
I have to restart Nistune for wideband to work again.

Other functions work properly such as Input tracer , data logging....etc without issues.

Only when I open Auto AFR or AFR grapher, wideband stops working.

Wideband itself on LM-2 handheld is functioning properly.

Re: Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Thu Jan 03, 2019 11:50 am
by Matt
Managed to identify the issue (caused by array overrun in 1.2.88 version). Will put a release out today

Re: Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Thu Jan 03, 2019 8:26 pm
by mike2016
Great! Will test it out

Thanks Matt for the quick action

Re: Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Sat Jan 19, 2019 10:53 am
by wilsonthesphere
I have the same exact same issue for the
Type 1 board
Z31
LC-1 wideband

Should the fix also apply to the type 1 board?

Thanks

Juan

Re: Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Mon Jan 21, 2019 11:36 pm
by Matt
Yes its already fixed in the 1.2.103 version.

Re: Auto AFR bug - wideband freeze when Auto AFR is open

Posted: Tue Jan 22, 2019 3:00 am
by wilsonthesphere
Thank you Matt