PLX iMFD Connection

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
nismoS14
Posts: 18
Joined: Sat Feb 17, 2018 9:42 pm

PLX iMFD Connection

Post by nismoS14 » Mon Oct 14, 2019 5:55 pm

Nistune Version 1.3.11

Only AFR is displayed on the wideband screen.
Why aren't SM-EGT, SM-VAC / BOOST, and VOLTS displayed?
→Of course, everything is displayed in PLX guage.
Attachments
nistune-1014-1523.zip
(494.67 KiB) Downloaded 127 times

Matt
Site Admin
Posts: 8322
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: PLX iMFD Connection

Post by Matt » Wed Oct 16, 2019 10:22 am

06:24:07.877 Entry: 0: Instance: 0 Address: 3 Raw Data: 129
06:24:07.877 Entry: 1: Instance: 0 Address: 4 Raw Data: 0
06:24:07.877 Entry: 2: Instance: 0 Address: 1 Raw Data: 294
06:24:07.877 Entry: 3: Instance: 0 Address: 0 Raw Data: 119
06:24:07.877 Entry: 4: Instance: 0 Address: 18 Raw Data: 712
06:24:07.877 Entry: 5: Instance: 0 Address: 25 Raw Data: 101
06:24:07.877 Entry: 6: Instance: 0 Address: 26 Raw Data: 1000

All data is being received. If you right click to add item to display, you don't see those channels listed? I'll have to try it out here

nismoS14
Posts: 18
Joined: Sat Feb 17, 2018 9:42 pm

Re: PLX iMFD Connection

Post by nismoS14 » Mon Oct 28, 2019 1:30 am

Consult log: will be displayed
Wideband screen: Not displayed
Look at the attached file
Attachments
ScreenShot.jpg
ScreenShot.jpg (704 KiB) Viewed 438 times

Matt
Site Admin
Posts: 8322
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: PLX iMFD Connection

Post by Matt » Wed Oct 30, 2019 10:30 pm

Okay they are in the log, so you can right click an add them to the gauges. So what you can do is right click, add number gauge for each input you need (like EGT and boost) instead of using the older wideband window.

They are not available in the 'wideband' window at the moment since the PLX inputs are special and are device configuable. It was difficult to tie them to the AUX1-AUX6 hard coded inputs in the 1.3 updates compared to other units

nismoS14
Posts: 18
Joined: Sat Feb 17, 2018 9:42 pm

Re: PLX iMFD Connection

Post by nismoS14 » Fri Nov 01, 2019 10:50 pm

OK.
Thank you.

Matt
Site Admin
Posts: 8322
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: PLX iMFD Connection

Post by Matt » Sun Dec 15, 2019 5:27 pm

Fix made for next release. Tested live and playback iMFD

Post Reply