AEM UEGO Gauge

Anything related to the AEM brand of wideband devices.

Moderator: Matt

Post Reply
AndyStuttgart
 

Posts: 30
Joined: Thu Feb 15, 2007 7:53 am
Location: Stuttgart/Germany
Contact:

AEM UEGO Gauge

Post by AndyStuttgart »

Hi,

will support for these gauges be added?
They´re quite cheap and I´ve got one, that´s why I´m asking ;)
Link:
http://www.aempower.com/ViewCategory.aspx?CategoryID=67

Cheers,
Andy
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

the protocol for these is really simple. yes i will add support for these
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

This has been added. Please confirm it works
AndyStuttgart
 

Posts: 30
Joined: Thu Feb 15, 2007 7:53 am
Location: Stuttgart/Germany
Contact:

Post by AndyStuttgart »

Took some time, but finally tried to use it - doesn´t work.
Seems to connect at Port 1, but then there´s a message like "Wideband not configured" and it just reads 9 permanently...
If I open Com1 with Windows Hyper Terminal, I get correct reading submitted all the time though...
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

When it says 'wideband not configured' this means that the COM port has not been selected from File - Configuration for the unit

So make sure in File - Configuration that
Wideband Type = AEM UEGO
Wideband Com = COM1

Retry the connection and let me know how that goes. If that doesnt work then please shoot me through a debug log (Enable Debug Logging and the log files *.log get put in c:\Program Files\NIStune\logs)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Dont worry about that log... I found the problem when I was adding the DLP A/D converter in the wideband code

It is fixed and all tested and confirmed working with my AFR output simulator. Will be available in the next version
AndyStuttgart
 

Posts: 30
Joined: Thu Feb 15, 2007 7:53 am
Location: Stuttgart/Germany
Contact:

Post by AndyStuttgart »

Matt wrote: It is fixed and all tested and confirmed working with my AFR output simulator. Will be available in the next version
When´s it coming out? ;)
LMQT
 

Posts: 41
Joined: Sat Apr 28, 2007 3:51 am

Post by LMQT »

As I said in another topic, it works for me since june or july (when I bought this UEGO), so I'm surprise :shock:
200SX RS13 Zenki (w. CA18DET)
280hp & 330Nm @ 16PSI (GT25R)
Nistune type 1 rev3a
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Should be in a few days. I want to fix that logging problems where it logs nothing in the file sometimes even though it looks like it is on the screen.

Once thats done and retested a few things it should be good to release version 0.9110

However if my Moates emulator arrives early I might double check the dual ROM emulation functionality and also look into Eds ROM offset problem too. Trying to get a few bugs off my list!
AndyStuttgart
 

Posts: 30
Joined: Thu Feb 15, 2007 7:53 am
Location: Stuttgart/Germany
Contact:

Post by AndyStuttgart »

When do you release 0.9110?
Just got my two Ostrich 2.0 yesterday and would like to start playing around with the car today ;)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I dont have good news on the Ostrich front...
I've attached a document which should cover the basics of the protocols for
trace. I have yet to finalize the implementation, but it will be soon via
firmware update.
In other words the firmware doesnt support address tracing yet. I have my Ostrich 2 here also but havent had time to even plug it in yet :(

I'm visiting a customer tomorrow to tie down an Innovate bug, and once that is fixed along wtih logging will do a release after then.
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

Dont fancy adding/fixing the offset odd/even split do you PRETTY PLEASE! :)
AndyStuttgart
 

Posts: 30
Joined: Thu Feb 15, 2007 7:53 am
Location: Stuttgart/Germany
Contact:

Post by AndyStuttgart »

Verified in car and works - thanks ;)
But please change the look, since AEM doesn´t support additional inputs so just AFR would do in the wideband box...
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I'll add that one as an enhancement. I would have to do new code to redraw and the scale the fonts automatically based on how many sensor inputs there are i that window

Currently they are just drawn manually onto the window using fixed sized boxes
Post Reply