Connection Issues

Anything related to the AEM brand of wideband devices.

Moderator: Matt

Post Reply
Posts: 6
Joined: Sat Jun 20, 2020 2:00 pm

Connection Issues

Post by Jake » Fri Apr 09, 2021 3:33 pm

Like some other posters I am having odd connection issues. Sometimes when I connect to the wideband Nistune connects right away and behaves as expected for as long as I like. If it connects it never drops out.

Sometimes when I connect to the wideband it will take the first reading and be stuck there. I have to disconnect and reconnect until it starts reading normally. Sometimes it will display the data in the boost window for some reason. I logged the data in a serial terminal and the data seems to come in fine, matching the gauge.

I made a nistune log that I have attached. In it i attempt to connect to the wideband a few times while the engine is running. I also have a much longer log from after this when it did connect so I datalogged my drive home. The file is too large but I can email it if you like.
(856.52 KiB) Downloaded 11 times

Site Admin
Posts: 8683
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia

Re: Connection Issues

Post by Matt » Tue Apr 13, 2021 8:29 am

Thanks for the log. I'll look into it and see what is going on.

Post Reply