USB driver install??

Discuss hardware problems here.

Moderator: Matt

Post Reply
RobH
 

Posts: 56
Joined: Wed Nov 21, 2007 5:38 am

USB driver install??

Post by RobH »

Hi All, please forgive my ignorance, I'm a newbie here. Finally got my car started again yesterday after installing the engine with some mods and am now trying to get Nistune running.

I have a Z32, type 2 board (not yet installed), and a USB consult cable which I'm trying to use to setup some basic items such as TPS before getting to work with Nistune.

The problem I'm having is that my W2K laptop will not install the driver for the Consult cable and I'm having difficulty finding any reference to the correct procedure. 'The specified location does not contain information about your hardware' or similar is the error I'm getting. W2K sees the cable, the red light comes on, but it just won't accept the driver.

Have I missed something?? Can anyone point me to the correct installation procedure? Or do I have to install the Type 2 daughterboard before attempting to connect and use the Consult cable?

Hope someone can help.

Thanks in advance.

RobH
RobH
 

Posts: 56
Joined: Wed Nov 21, 2007 5:38 am

Ooops!

Post by RobH »

Ooops! Sorry guys, I was using what I thought was the corect driver but it wasn't....

Downloaded the correct one from PLMS...

Cheers and please feel free to delete this post!

RobH
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Just as a note, this is the XP location for PLMS USB consult cables
C:\Program Files\NIStune\PLMS_Consult_USB_Driver_Win2K_XP
Post Reply