Page 1 of 1

ACRONAME S27 UART A/D converter

Posted: Wed Feb 26, 2020 5:46 am
by zimzoom_14
Hi..Does anyone have any experience with this FTDI converter.? Concept Z sold it to me as part of the NISTUNE istall on my Z32TT.
Iam pairing it to a Glowshift 7 AFR WB with a 0-5v analog output which is all working fine as a standalone.Iam running Nistune on a recent laptop running W10. It came with the correct cable and was about 16USD.
Nistune and consult are working fine with my ECU.
Any tips would be great.I have configured the port using DLP, and the csv file, but WB times out shortly after engaging WB1 option.
Thanks in advance.

Re: ACRONAME S27 UART A/D converter

Posted: Thu Feb 27, 2020 6:20 pm
by Matt
Never heard of/used that converter. Is it DLP compatible?

Check with Concept Z about that since they sold you it

Re: ACRONAME S27 UART A/D converter

Posted: Thu Feb 27, 2020 9:39 pm
by zimzoom_14
it has the FTDI chipset according to docs, and should be DLP compatible. Ive tried all of the lookups, no joy.My WB 0-5v output iis working, but NT dosnt bring up any numbers in the WB window, it just times out.
I have access to a PL2303 device, but i fear it may be a china special.

Re: ACRONAME S27 UART A/D converter

Posted: Fri Feb 28, 2020 6:38 pm
by Matt
FTDI is just the USB/serial converter chip. DLP has another chip which does the protocol and A/D conversion.

If it doesnt work with Nistune then it is probably a different protocol