Page 1 of 1
installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Sat Mar 26, 2011 11:40 pm
by maxgohan
hey, any recommendations as to how i can install the board into my ECU?
its an RB20det on a hcr32 chassis
here are the pics outlining my problem,
http://www.dropbox.com/gallery/9263148/ ... u?h=a49d89
as you can see, my ecu is currently socketed by "as tuning by select" and it has some sort of blue chip holder/locker mechanism (metal bar to lock chip)
the metal bar gets in the way of the nistune board, do i need a new socket??
PLEASE HELP!!!
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Sun Mar 27, 2011 5:09 am
by TM_S13
I believe the better way is to remove that blue socket and fit a normal socket in there...
quite an easy job, providing you have the tools for that and are handy with the soldering iron
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Sun Mar 27, 2011 8:24 am
by maxgohan
what would a fair price be to pay for that service?
i don't have the tools to desolder and resolder a new socket
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Sun Mar 27, 2011 5:54 pm
by CoZZm0
30 minute or less labour charge from any electrical repair shop (TV/Video/HiFi).
If it takes them longer than 30 minutes with proper desolder tools they're doing it wrong.
If you're in Sydney i could look at it for you as i have desoldering tools that i use for installing boards.
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Sun Mar 27, 2011 9:00 pm
by maxgohan
i'm gonna call a few tv repair shops in the morning
i'm in toronto so i'd rather try to deal with someone local rather than ship it...
i'll let you know if i decide to try to ship it!!!
thanks
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Mon Mar 28, 2011 10:36 am
by maxgohan
CoZZm0 wrote:30 minute or less labour charge from any electrical repair shop (TV/Video/HiFi).
If it takes them longer than 30 minutes with proper desolder tools they're doing it wrong.
If you're in Sydney i could look at it for you as i have desoldering tools that i use for installing boards.
i'm in toronto, so that'd be a pretty far drive...
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Mon Mar 28, 2011 9:08 pm
by bachig24u
I installed one last week, It's a little tight but definitely a no go with a ZIF socket.
Make sure you inspect the work from whereever you take it. I had to re-repair 2 tracks after a local tv-repairer had a go at installing a customer dodgy tuneup chip and butchered the board.
Re: installation woes!! type 2 board on hcr32 chassis (rb20)
Posted: Mon Mar 28, 2011 10:25 pm
by Matt
Correct tools are the key. I'm seen some bad install jobs come in which required repair (some cases the ECU is a throw away job)