Page 1 of 1

Here ya go fellas

Posted: Sat May 15, 2010 1:35 pm
by Nackerz
ITEM: Genuine A8 VL Turbo Motor out of a BT1

LOCATION: Mansfield VICTORIA

CONDITION: AS NEW, REBUILT Never started

PRICE: Negotiable, Make an offer, May swap for something to the same value of interest.

ROUGH PRICE: $9,000

DELIVERY/PICK UP INFORMATION: PICKUP Only, May deliver for a fee, see details below

PAYMENT OPTIONS: CASH on pickup

CONTACT DETAILS: PM, POST

OTHER INFO: Please Read On FOR INFO

PICTURES: AT BOTTOM OF PAGE



HI ALL AND WELCOME!



Here today I'm selling ALL of my turbo gear!



DROP IN AND GO!



This is a genuine A8 VL TURBO motor which came out of a BT1.


I purchased this motor to rebuild! Which I have done.

When Pulled down and inspected, it still had the factory X hones in the bore! Unusual for these types of motors which are hard to come by as it is. Not many around with the factory hone marks still left in them!!!

The motor was rebuilt with the following parts:

Piston were still like new so reused with brand new HASTINGS Rings

The Crank was never removed so there was no need to change the mains bearings

The Conrods were reattached to the crank via KING Bearings

The Head is a RECO VLT head with a WADE CAM installed to it. It was then fitted to the bottom end with a GENUINE NISSAN Head Gasket and ARP HEAD STUDS

Then it was time to fit the water pump, This is a ENDUROTEC Water Pump, Recommended by M&W Engine Builder's Located in Ballarat. (Also Purchased from them)

Time for a GATES RACING TIMING BELT Fitted to the front, to ensure there was no problems with it


Ok now for the rest, as thats just the engine!


This listing will come with the following:


Genuine A8 Turbo Motor REBUILT never started since
Full 3" exhaust from the turbo back
Custom High Mount Manifold with external gate
External Gate is a Turbo Smart Ultragate 38mm with screamer pipe
REBUILT T04E Turbo with internal gate welded shut, Oil and Water Cooled, Polished Front housing
ALL oil and water lines INCLUDING Fittings
Brand NEW never fitted Mirror Polished Forward Facing Plenum with semi polished XF Throttle Body Attached to the front
Front Mount Intercooler With Piping to suit stock Intake manifold (can be modded to suit forward face Plenum) 3" inlet and outlet
A heap of silicone joiners with some clamps
Chrome Plumb back BOV (Blow off valve)
Bosch 044 fuel pump, With Fittings (Hasn't had much use)
A BRAND NEW 14mm O-RING Conversion BILLET Fuel rail in anozoied BLUE
Twin Thermo's
VL Alloy Radiator only had 2 weeks work
Q45 Air Flow Meter 90mm 3 1/2" AFM Comes with plug
Malpassi Fuel Regulator
Oil Catch can
Comes with an orginal BT1 VLT engine loom


I do have currently on the motor a freshly painted wrinkle red holden rocker cover, but also have a nissan rocker cover there.

I also have reciepts for this.

YES its a genuine A8 motor.



This is a serious listing only, please contact me if you have any questions as I have most likely to have left something out!



CASH only on pickup

PICK UP ONLY

Located in MANSFIELD VICTORIA

Can deliver for a fee and in a certain amount of distance, please contact if you are unsure

PLEASE NO TYRE KICKERS

NO POSTAGE



I have uploaded some photo's will upload more when i get a chance, in the middle of moving so not much time on my hands


The Pictures of the motor is in the build, i will get more pics later on when its all bolted together, This is just to give you an idea



Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: Here ya go fellas

Posted: Tue May 18, 2010 3:40 pm
by Nackerz
will swap for something of interest

Re: Here ya go fellas

Posted: Wed May 26, 2010 1:06 am
by Nackerz
Will sell for $6,000

Re: Here ya go fellas

Posted: Thu May 27, 2010 2:59 am
by Nackerz
Image
Image
Image
Image
Image

Re: Here ya go fellas

Posted: Thu May 27, 2010 4:05 am
by enohand
think i can squeeze that in my p10? (g20/primera)????

lol j/k

nice price

Re: Here ya go fellas

Posted: Sun May 30, 2010 2:47 am
by Nackerz
Image
Image
Image
Image
Image