Innovate MTX-D gauge

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Innovate MTX-D gauge

Post by Matt »

Today I did a MTX-D install for a customer. This is an R34 ECU. I also wired the evap solenoid to the boost cut output, so we can use the boost control using a 3 port MAC valve by ethanol content

As usual, it took a lot longer than expected and I had to supply half a Nistune flex kit to get it finished

Attached are pics of the install. Basically get the power from the ECU, and the yellow wire to the ECU for ethanol content.

Also the white wire should be wired to the headlight for dimming (job for the customer)
Attachments
mtx4.png
(814.83 KiB) Downloaded 2604 times
mtx3.png
(749 KiB) Downloaded 2604 times
mtx2.png
(958.43 KiB) Downloaded 2604 times
mtx1.png
(803.8 KiB) Downloaded 2604 times
Post Reply