ECF1 Wideband and Ethanol blending into Nistune

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
wilsonthesphere
 

Posts: 10
Joined: Sun Sep 02, 2018 4:30 am
Location: Miami, FL

ECF1 Wideband and Ethanol blending into Nistune

Post by wilsonthesphere »

https://www.innovatemotorsports.com/products/ecf1.php

Question for Matt or who ever else has tried the ECF1 unit. I sure the wide-band would work fine because it uses innovate MTS Serial protocol but wanted to confirm if the Ethanol blending would work. Innovate states it has analog output for ethanol of 0v-5volts so I wouldn't need the flex fuel converter board just wire it into the ECU. This would installed for a TYPE 1 board feature pack installed.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: ECF1 Wideband and Ethanol blending into Nistune

Post by Matt »

I've not tried it, but if the ethanol output is similar to ours and the Innovate ECA-2 where 0V = 0% and 5V = 100% ethanol then you can wire it straight to the ECU diag input
Post Reply