LC-1

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
fikemoo
 

Posts: 40
Joined: Fri Jul 19, 2013 4:41 am

LC-1

Post by fikemoo »

Hello there guys got the wideband on the car today, set the wideband config in the settings to the correct folder and on the right hand side selected innovate and the com port it was on, nistune could see the wideband but it didnt seem to be getting any data. but the innovate software was getting data.

Two questions really:

1. How is the wideband displayed in nistune as we couldnt see a wideband gauge on the gauge display
2. And have i set it up correctly as nistune is seeing and finidng the wideband are the any more steps ive missed
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: LC-1

Post by Matt »

File > Configuration

Make sure Innovate MTS is selected as primary wideband, and the COM port matches that in LogWorks
Also make sure the Wideband lookup table is the Innovate one (there is a folder path in this window)

Assuming both of those are correct, a window with AFRs should show up when the wideband is connected to Nistune (also shows up in the 4 x gauge icon window when connected)
fikemoo
 

Posts: 40
Joined: Fri Jul 19, 2013 4:41 am

Re: LC-1

Post by fikemoo »

Hi matt thanks again for the reply, once again very usefull, ill let you know how we get on :D
Post Reply