LC-2 connects but dont display afr ?

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

LC-2 connects but dont display afr ?

Post by IceManPL »

Innovate lc-2 connects to nistune but dont display AFR - display is black, no AFR in logs
Other innovate wideband (mtx-l) works fine.
Any ideas ?

Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: LC-2 connects but dont display afr ?

Post by Matt »

I check it out today. Which version are you using (Help-About)?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: LC-2 connects but dont display afr ?

Post by Matt »

Tested now on my LC-1 which is effectively the same

Make sure correct COM port, and that AFR1 is assigned to WB1 (tickbox)
Attachments
2021-10-08 09_38_01-Nistune [ER34 SKYLINE (RB25DET) Feature Pack 2.0 (Version_ 1)].png
(45.79 KiB) Downloaded 3501 times
2021-10-08 09_30_05-.png
(13.31 KiB) Downloaded 3501 times
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

Re: LC-2 connects but dont display afr ?

Post by IceManPL »

sry for late answer ;)
installed newest version of logworks and problem gone :)
thx
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: LC-2 connects but dont display afr ?

Post by Matt »

Ah better late than never! They probably 'fixed' something in their drivers
Post Reply