Innovate MTX-D gauge

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
Matt
Site Admin
Posts: 8683
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Innovate MTX-D gauge

Post by Matt » Mon May 31, 2021 11:23 pm

Today I did a MTX-D install for a customer. This is an R34 ECU. I also wired the evap solenoid to the boost cut output, so we can use the boost control using a 3 port MAC valve by ethanol content

As usual, it took a lot longer than expected and I had to supply half a Nistune flex kit to get it finished

Attached are pics of the install. Basically get the power from the ECU, and the yellow wire to the ECU for ethanol content.

Also the white wire should be wired to the headlight for dimming (job for the customer)
Attachments
mtx4.png
mtx4.png (814.83 KiB) Viewed 189 times
mtx3.png
mtx3.png (749 KiB) Viewed 189 times
mtx2.png
mtx2.png (958.43 KiB) Viewed 189 times
mtx1.png
mtx1.png (803.8 KiB) Viewed 189 times

Post Reply