MAF identification N62 vs N60

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
my1path
 

Posts: 87
Joined: Fri Apr 06, 2012 8:06 am
Location: Southern CA, USA

MAF identification N62 vs N60

Post by my1path »

I thought I was swapping an N62 for an N60 into my custom housing but when I popped the lids both circuit boards have "N62" printed on them and their outside labels say otherwise. I wrote in the top left corner what they should be in blue marker.

The N60 (with N62 board) I pulled out of a running M30 that should have always been an N60.
The N62 (with N62 board) I bought used and seemed genuine to me, I used it to build my custom housing.
Reason for the swap: no more nistune, stock M30 ECU needs stock N60 MAF

So what's the deal? Do they just run the same board or should a true N60 have "N60" printed on the board?


240725240_526831775053902_776408035377555253_n.jpg
(84.18 KiB) Downloaded 774 times
241010650_935449887008446_9117353844246868753_n.jpg
(36.49 KiB) Downloaded 774 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: MAF identification N62 vs N60

Post by Matt »

I've not seen this type, but both look lefit, but might have different calibrations in them

viewtopic.php?f=12&t=1431&start=15
I don;t have a photo, but the type shown in this thread (inside) had silocone over the top of the circuitry
my1path
 

Posts: 87
Joined: Fri Apr 06, 2012 8:06 am
Location: Southern CA, USA

Re: MAF identification N62 vs N60

Post by my1path »

Matt wrote: Thu Sep 02, 2021 7:03 pm I've not seen this type, but both look lefit, but might have different calibrations in them
Agreed and Plugging in confirms it; the N62 (inside and out) runs the engine leaner than the N60 (outside label only) So I proceeded with the housing swap.
I also spotted some visual differences.
Untitled.jpg
(192.57 KiB) Downloaded 758 times
Matt wrote: Thu Sep 02, 2021 7:03 pm viewtopic.php?f=12&t=1431#p9543
I don;t have a photo, but the type shown in this thread (inside) had silocone over the top of the circuitry
Yeah, that one looks like trash.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: MAF identification N62 vs N60

Post by Matt »

Interesting with the white paint over the IC and no NEC markings on that voltage regulator with the N62 (Z32) one. It should be a Hitachi IC like the N60
Post Reply