engine cut at 6000rpm

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

engine cut at 6000rpm

Post by boarderline »

Hey guys,
I have a s2 RB25DET with ebay greddy intake. godspeed top mount exhaust manifold. bullseye 56 AR turbo. 550cc injectors. walbro 255l fuel pump. ls2 coil pack upgrade. a z32 tt maf sensor.

last year i was running 10 psi boost, i had my rev limiter set to 7k and i had no problems bouncing off of it.
i just turned the boost up to 16psi and now my engine cuts out at 6k if im doing a WOT pull. If i run 50% throttle or free reving it will go to 7k no problem still.

i have tried to turn my load limits up but nothing worked. tried taking a little bit of timing out, still didnt work.

Do you guys have any other ideas on what could be holding me back. here is my tune currently.

>
6-25-19 loads adjusted.bin
(32 KiB) Downloaded 78 times
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Engine cutting out at 6000 rpm

Post by boarderline »

Hey guys,
I have a s2 RB25DET with ebay greddy intake. godspeed top mount exhaust manifold. bullseye 56 AR turbo. 550cc injectors. walbro 255l fuel pump. ls2 coil pack upgrade. a z32 tt maf sensor.

last year i was running 10 psi boost, i had my rev limiter set to 7k and i had no problems bouncing off of it.
i just turned the boost up to 16psi and now my engine cuts out at 6k if im doing a WOT pull. If i run 50% throttle or free reving it will go to 7k no problem still.

i have tried to turn my load limits up but nothing worked. tried taking a little bit of timing out, still didnt work.

Do you guys have any other ideas on what could be holding me back. here is my tune currently.

>
6-25-19 loads adjusted.bin
bsdkllr
 

Posts: 56
Joined: Wed Mar 09, 2016 5:32 am
Location: Boston, MA

Re: Engine cutting out at 6000 rpm

Post by bsdkllr »

What is your boost sensor fuel cut set to at high rpms?

PS. cant download your file is it attached correctly?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: engine cut at 6000rpm

Post by Matt »

Got a log file of the problem showing the cut?
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: Engine cutting out at 6000 rpm

Post by boarderline »

That could be it. Im not sure where to find that setting. here is my tune
6-25-19 loads adjusted.bin
(32 KiB) Downloaded 85 times
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: engine cut at 6000rpm

Post by boarderline »

in the ecu notification box it doesnt show want it is being held out on.
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: engine cut at 6000rpm

Post by boarderline »

here is a log of a pull
Nistune_2019-06-27_2018_20.csv
(55.37 KiB) Downloaded 89 times
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: Engine cutting out at 6000 rpm

Post by boarderline »

here is a log of a 2nd to 3rd gear pull
Nistune_2019-06-27_2018_20.csv
(55.37 KiB) Downloaded 86 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Engine cutting out at 6000 rpm

Post by Matt »

Please don't create duplicate threads
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: engine cut at 6000rpm

Post by Matt »

I cannot see any ECU commanded fuel cut in the log file (where injection time is cut, and TP is set to 0)

What timestamp are you seeing the issue in the log posted?
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: engine cut at 6000rpm

Post by boarderline »

sorry about the duplicate post. thought the other thread would be better spot for this but this thread works for me.

i am seeing it at 39.29 seconds, attached is a screen shot of where my issue is.
log.jpg
(556.5 KiB) Downloaded 1905 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: engine cut at 6000rpm

Post by Matt »

Yeah thats not an ECU fuel cut. There is no cut to injection time (where it drops straight down)

Seems like you could have an intake or exhaust restriction, like a pipe or air filter sucking shut, which then drops your MAF/RPM
boarderline
 

Posts: 20
Joined: Thu Mar 27, 2014 6:29 am

Re: engine cut at 6000rpm

Post by boarderline »

Hey matt,
SO im pretty sure I dont have a exhaust restriction. 3" down pipe to 3.5" exhaust under the car to a y pipe that goes to 2 2.5" pipes and ends. i changed my filter on my intake and still having the same issue. i guess it could be sucking closed a coupler or something. i did take a couple more logs. let me know what you think.
Nistune_2019-07-03_1745_02.csv
(19.77 KiB) Downloaded 69 times
Nistune_2019-07-03_1743_54.csv
(28.28 KiB) Downloaded 71 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: engine cut at 6000rpm

Post by Matt »

Both logs show MAF dropping sharply (and TP load and injection time follow) but there is no fuel cut

Find out is causing that, but it does not appear to be the tune
Post Reply