Nistune 1.3

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Are the external CSV files for WB still used?
So can I just copy my modified version into the WB directory?
You will notice that the Wideband 1 / 2 folders in the Folders tab are the ones which are used

They are no longer combined, which then allows separate use of AUX1-6 and AUX1-6 for each wideband unit, for the selected wideband. For example WB1 can use AFR1, AUX1-3 and WB2 can use AFR2, AUX4-6
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.2
Fix: Adjusted TPS broken from consult speed updates
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.3
Fix: Where ECUs missing TP register in consult table (stream mode), add this back in
Fix: Motec PLM lookup table removal. No interpolation for AFRs
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.4
Fix: Crash fix due to change with logger name
jj205mi
 

Posts: 20
Joined: Tue Aug 23, 2016 1:20 am

Re: Nistune 1.3

Post by jj205mi »

I am still just learning, but i really like the changes to the software and the way it looks. Its good that you keep the updates coming, thanks!
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.5
Fix: Crash fix when ECU status window closed, and TP warning event occours
Add right click option to remove shading for modern gauges, for display speed improvement
Fix: Log play back issue, playback with wideband entries mixing up sensor data with names
Fix: Live emulation updates on individal cells not functioning (emulator only)
Fix: Write adjusted TPS on NEO ECUs only if not PIN locked
Fix: Consult register window displaying twice if window up for more than few seconds
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

My installer package was updated and no longer supports Windows XP. Some people are still using this OS apparently. I've gong back to an older version of the installer, and 1.3.5 is now available for XP still
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Verison 1.3.6
Add AFR editing for CSV from Config Wideband menu
Fix: PLX iMFD log replay not showing channels
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.7
Fix: Logger open file after record blank. Fix state change
Logger play in record mode activated. Other minor log fixes
Added: Right click open constant/table group feature
Increae font scaling for multi guages
Clear DTC from the lower status window
Add knock parameters to application. Some address files updated
Add right click display knock detection region
Fix for table gird sizes in consistent/independent mode
Add BDTC parameter for timing tables
Fix constant display converion problem with decimal point numbers
HR31 TIM FP support added
nismoS14
 

Posts: 18
Joined: Sat Feb 17, 2018 9:42 pm

Re: Nistune 1.3

Post by nismoS14 »

Hi,Matt

A warning is displayed at startup after switching to version 1.3.7.
Attachments
warning.pdf
(22.11 KiB) Downloaded 107 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

I've fixed the warnings in the address files and reuploaded that version
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.9
Crash fix for window positioning updates
Version 1.3.8
Add extra VQ maps
M30 Address file udpates
Various crash report fixes
my1path
 

Posts: 87
Joined: Fri Apr 06, 2012 8:06 am
Location: Southern CA, USA

Re: Nistune 1.3

Post by my1path »

I like the the startup guide! Reviewing it was useful but I would like the option to not see it every time I launch the software.

On the main timing and fuel maps the buttons below the map disappear when the upper or side menus are clicked on. Cliking the map moves the map to the front but not the buttons. They remain hidden until the main map is either moved or closed and re-opened.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Right click the startup to prevent it reopening

Something to do with window reodering and opening is not pushing the bottom panel to the front. I need to investigate further
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt »

Version 1.3.10
Fix: Increase screen pixel limits for window positioning and max size
Fix: Ethanol reporting incorrect
Fix: Channel selection ordering change
Locked