Nistune 1.3

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Thu Sep 26, 2019 7:45 pm

On the main timing and fuel maps the buttons below the map disappear when the upper or side menus are clicked on
This only seems to happen if you right click an untick 'docking' yes? The display order changes map display, then grid and panel

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Mon Sep 30, 2019 10:14 pm

Version 1.3.11
Fix: Crash fix for added knock registers
Consult timeout freeze fix

nismoS14
Posts: 18
Joined: Sat Feb 17, 2018 9:42 pm

Re: Nistune 1.3

Post by nismoS14 » Mon Oct 07, 2019 2:19 am

Hi,Matt

PLX iMFD connection.
Only AFR is displayed on the wideband screen.
Why aren't SM-EGT, SM-VAC / BOOST, and VOLTS displayed?

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Tue Oct 08, 2019 10:45 pm

This is a release thread. Please raise bug reports/issues in the bug thread along with the required details (version used, inputs selected and debug log files) so I can investigate further. I'm not aware of any PLX issues at this time

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Sun Jan 05, 2020 5:55 pm

Happy new year! Some more updates. I'm releasing 1.3.14 as a beta version with the main focus being code optimisation and speed improvements to address freezeups and other related issues. As usual, report any issues in the bug thread and I'll investigate them. Will be doing some more testing on the release this week to check all is good so I can put a version up for auto-update

Version 1.3.14
Log player timer driven. Performance improvement. Fixed fast playback operations
Add 16 bit latency parameters to U12/S13 KA24E
Fix: Input tracer to ignore ghosted ticked items (not enabled/ticked in consult or playback)
Version 1.3.13
Fix: closed loop name indexes and parameter location
IMFD fix for display from logs
Imperial lookup fix for parameters
Display update, don't keep updating items until they respond back
Version 1.3.12
Fix: Update HR31 FP filename
Fix: Address update M30 enrich, VCT2 for N14 SR20DE
Fix: After start table name
Display scheduler improvements
Improve shaded gauges redraw time
Logger fast play fixes
Maptrace update rate optimisations
Seperate safety limiters from load/rev limiter warnings
Wideband traffic and logging update improvement
Detect screen size and detect off screen, move window
Fix: Wideband titles not displaying
Fix: Innovate overwriting second wideband titles
Add titlebar to mapview
Optimise consult event handling
Save hidden groups to XML file
Send gauges to top
Add antistall TPS max decel, TPS idle and crank voltage adjust for FP1 updates

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Tue Jan 07, 2020 11:59 am

Fix required after initial round of testing. Few more noted changes to be made in subsequent build

Version 1.3.15
Fix: Crash on startup when update check fails
Add smart adjustment to alter both K/TIM/TID depending on MAF chosen and injector size
Minimum adjustment limit for crank enrich table, to deal with large injectors

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Tue Jan 14, 2020 11:44 am

More beta updates for 1.3.17

Version 1.3.17
Fix: Innovate only use min, max from CSV no interpolation. Value direct from WB
Fix: Right click multi gauges tickboxes
Add peak needle inside multigauge modern view
Allow multigauges to take full screen on startup (remove LHS panel check)
Change Innovate MTS to be only allowed on WB1
Version 1.3.16
Fix: Maps - Fix delta filtered value
Fix: MTS second chained channel allocated (when second AFR unit set to None)
Updates for XML file location to My Documents (was Wideband)
Increase max gauges and fix incorrect name limiting to 15
Fix: For gauge freeze up on connect/disconnect
Fix: Innovate use only CSV entries for name, units. Make fields editable
Add: Copy button to import MTS entries from LogWorks (must be run in Admin mode to work properly)
Add: Allow AFR1/AFR2 entries for MTS and DLP units
Fix: Only save wideband CSV files when entries modified
Add: Add units field to wideband CSV file (desc, units)
Fix: Remove zero length files when mode switch, or detected on open
Fix: Logger: Remove play button in record mode, or if log file empty

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Sat Feb 01, 2020 10:16 pm

Next beta. Hopefully the last one

Version 1.3.18
Fix: for min/max gauge context menus, font size changes
AppData folder as backup if Documents not available
Fix: input tracer cursor min/max not keeping value
Fix:Variable grid context added back
Replace some msgbox window with status panel updates instead
Logplayer rework. Tested fit, zoom, record, playback, stepping, page scroll
Fast playback optimisations

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Thu Feb 06, 2020 3:58 pm

Next beta after some further testing this week

Version 1.3.19
Add wideband disconnect messages
Fix: WB RHS playback display correction
Fix: Update WB1/WB2 scrollers only when that device connected, or in log play mode
Updates to Active Test window usability

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Mon Feb 24, 2020 5:15 pm

Version 1.3.20
Fix: Checkbox working again after 1.3.19
Add CA18DET FP1.1 support
Fix: Refresh port list button (consult configuration window)
Min/Max only show in gauges window
Clear Type 1 consult errors from status window clear button
Put knock and AOI back into logger (Tested knock inputs with HCR32, CA18DET)
Fix: Add red markings in fuel map when over knock count
Reset zoom level when switching to record mode

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Sat Apr 11, 2020 2:23 pm

Hope everyone is doing okay despite this crazy bat virus. Okay I'm pulling this out of beta. There will be an automated update for people running 1.3 and above put out next week. Up on the website now

Version 1.3.21
Add multi edit support for variable grid table
Fix: Needle reset flicking
Add HR31 RB20 70S00
Add support JG50 VH45DE
Add Z32 VG30, BNR32 RB26DETT, VLT RB30, HCR32 RB20DET, S13 CA18DET FP1.1 support
Fix: MIDI stuck infinite wait freezeup
Add GTR wastegate duty tables descriptions
Fix: Move newlines from translation file to application
Fixes for knock map descriptors
Fix: Combined sensors to include knock parameters
Fix: Only show internal registers in tuner mode or Type 1 USB mode
Add read knock registers for V17 firmware (TBD)
Fix: buffer overrun crash on load/merge
Fix: Log crash, zoom in long log index
Fix: Constant window when parameter list closed crash
Fix: Wideband crash on AFR1 CSV import

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Tue May 12, 2020 11:29 pm

Version 1.3.22
Add late B13 GA16DE
Fix: Remember last map view selection type
Fix: Only use cursor arrows in log view window
Fix: Map view display update (crash or leaves window frame trail)
Fix: ENTER key on filtered view working

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Sun May 17, 2020 10:39 pm

Version 1.3.23
Fix: Address XML correction causing missing vehicle list (when JG50 VH45DET was added)
Add maptracing for knock limit variable grid table
Add live playback review using cursor and mouse clicks in logger
Remove knock copy button with feature pack address loaded

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Tue May 19, 2020 8:54 pm

Version 1.3.24
Fix: Split internal register (flex outputs and duty cycle, TP idx into separate streams)
TP index, duty cycle etc were not logging in stream mode (removed Flex outputs from stream mode since they are not in the standard consult list)

Matt
Site Admin
Posts: 8432
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune 1.3

Post by Matt » Sun May 31, 2020 9:19 pm

Version 1.3.25
Fix: USB consult internal register list
Add min/max display range configuration for wideband units
Fix: Zoom fix on mapview window
Fix: Input trace window, colour fix for negative values

Post Reply