Bosch EV14 Injector Latency

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
JordanTr
 

Posts: 3
Joined: Tue Nov 05, 2019 1:06 pm

Bosch EV14 Injector Latency

Post by JordanTr »

I'm new to Nistune and in the process of building an "SRed" KA24DE soon to be KA24DET for my Datsun 510. I've opted to go with GM 6.2L E85 injectors P/N 12609749 @ ~525cc/min.

I've pulled this table from the GM tunes but I'm wondering which latency to use. They all seem reasonable at ~720-790us. I have not switched the injectors out yet but the car is running with the SR CAS disc and SR Nistune with R8 coilpacks.

ImageEV14 Injector Data by TRZ Fab, on Flickr

Is there an optimal latency I should start with based on those values at 14V or am I splitting hairs?

Thanks in advance for the help.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Bosch EV14 Injector Latency

Post by Matt »

About 790uS is a good starting point. I normally start them at 850uS depending on injector size and after I've established base mixtures (stoich at cruise with near 0% fuel trims) I then adjust latency to get idle running nice
JordanTr
 

Posts: 3
Joined: Tue Nov 05, 2019 1:06 pm

Re: Bosch EV14 Injector Latency

Post by JordanTr »

Thanks Matt! I will do that once I get back to it!
Post Reply