Supercharged VH45DE w/porsche Cayanne intake mani dyno

Results of any interesting tests done with or related to Nistune.

Moderator: Matt

Post Reply
gsracer
 

Posts: 22
Joined: Tue Sep 07, 2010 11:52 am

Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by gsracer »

So i had this vh45de in my s14 with a super charger and heard that a porsche cayenne intake manifold had the same port spacing.

So i went from this...

Image


made these

Image



ended up with this..

Image



and here are the results and gains from the stock intake to the porsche intake... The power loss after 6000rpm is due to the supercharger belt slipping, i would except it to make 450-470whp up top once the belt is corrected. But no need to wonder because I'm correcting the issue now and will be back to the dyno asap to prove it. Other than that great gains everywhere in the power band about 3000 rpm


Before and after

Image


Heres is the peak gains....


Image
TM_S13
 

Posts: 246
Joined: Mon Dec 29, 2008 11:29 pm

Re: Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by TM_S13 »

the area under the graph has indeed improved a fair amount.
was it just with the intake changes or the tune was tweeked too ?
gsracer
 

Posts: 22
Joined: Tue Sep 07, 2010 11:52 am

Re: Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by gsracer »

the tune was spot on before.. it was basically the intake and fuel.
TM_S13
 

Posts: 246
Joined: Mon Dec 29, 2008 11:29 pm

Re: Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by TM_S13 »

sweet =)
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Re: Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by STATUS »

Nice result, one of my customers wanted to charge his VH45 without the vortech lag, he went with a twin screw charger at 5psi. 272rwkw (364rwhp) and 481nm (355 ftlbs) was the result.

Image
Last edited by STATUS on Wed Dec 05, 2012 8:49 pm, edited 1 time in total.
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Re: Supercharged VH45DE w/porsche Cayanne intake mani dyno

Post by STATUS »

have you checked valve springs? as its very common to get valve float and is what i may suspect its close to happening with the one we nistuned today. it has some belt slip but i left it there as im worried about the valve springs as stock they only have 54lbs seat pressure.
Post Reply