Nistune Forums

that might have something to do with it. i'll add another user on my system and see if i can replicate.

so nistune software is running whilst switching users?

found this... that is not good 08:01:28.984 CMapView::DrawMap - encountered invalid pDC->m_hDC pointer Can you please do the following for me: Start-Run Enter 'regedit' as program to run Naviagate in this program to My Computer\HKEY_CURRENT_USER\Software\NIStune Developments\NIStune Right click on N...

Thanks. I'll have a look to see if anything in there.

Can you remember if there is anything in particular that you did which might have caused it? Or does it just stop opening windows when you use the software a particular time

NIStune software itself is still an ongoing project but first three Type boards have now turned into products There are another two boards (Type 4 and Type 5) which are still open projects and currently work in progress. Type 4 works on some ECUs (Y33 VQ30 and S14 KA24DE appear to work, S14A/S15/ER3...

Updated spreadsheets are now in the downloads directory

Users must upgrade to 0.9110 version now since about 20 days left before 0.9109 version expires Please let me know if any problems with this ... I'm still working on the final 0.9111 version... there is a test version available in the download directory but logging is still half way through implemen...

It has the AFR readout and 2 analogue 0-5 volt sensors. Not as many auxillary inputs as other brands and no thermocouple input but other than that would display and log fine in NIStune

thats a difficult one... the original ROM Editor address entries start from the offset. So a 32K ROM would have addresses 0000h-7FFFh in the address file (with an imaginary offset of 8000h where the maps really lived) so the CONSULT parameter was done the same. changing the OFFSET however is having ...

Sounds like the CONSULT table which NIStune uses in 'tuner mode' is being adjusted to the wrong location once you change the OFFSET value I checked the code and the OFFSET is being used to help with location of the table For example default K11 values are OFFSET = 0x8000 and CONSULT = 0x0F80. This m...

good stuff. heading towards winter yet over there now?

It may be worth checking what the multiplier is set for the AFR in the logworks software for that channel I believe we mulitply AFR by a value but need to double check when I get back to Adelaide (currently elsewhere at the moment). The unit we tested on reported valid values when I last checked 0.9...

Good stuff Thanks for the feedback guys. Its always good to see stuff working well

When you said the Wideband is 10x can you expand on that at all? I'm a bit confused!

thanks
Matt

The resync and burn operations are only applicable to NIStune realtime boards and not emulators/calumsult boards

Make sure your emulator type is set to 'Romulator Compatible' in File-Configuration and let me know how that goes

You too! Hopefully your comms is also better when you use the PLMS consult cable

It sounds like a bad display location was left in your registry for the map windows, so it never appeared when you clicked on it. This is why cascade/tiling the windows may have helped Code usually detects invalid window locations and put the window to the default location, but appears that it didn'...