Nistune Forums

they could be backwards. i'll swap them around then

thats been sent. probably email me for those things to guarantee a response!

i've updated the address file i haven't had time to investiagte this issue yet and will need to relook at the logs again. I'll probably just remove the status check for that particular error as a work around So the RAM trace isn't working on consult currently? I'll add that to the list and see what ...

no probs. I think I just got early S14 going this morning also with the boards. Next up is S15...

yep i can get an address file to you to use for maptracing stuff

we have working S13 SR20/KA24DE boards as of last week also which is good. need a slight firmware fix and some more boards made before we get some out for testing. let me know if you are interested in one of those

yep its 0.08 volts or 80mv ... the code uses interpolation between the points from memory

SR20 require header pins or special cables connected to an external daughterboard. these are quite different to other nissan ecus as they use a Mitsubishi 77xx chip rather than Hitachi 6802/6303 yep once the boards are ready i'll post more here. i've got some firmware updates still to do and several...

the R31 ECUs use a digital speedo. the pulses from the speed sensor in the transmission go to the speedo cluster which have some circuitry which then send a differenet signal to the ecu The Z31 ecus probably still have the same circuitry in the cluster but convert the cable speedo signal in the clus...

Zeitronix wideband has been added last night. I need to develop a small Zeitronix serial simulator for testing to check it out but should be ready soon

currently as it stands we have 2 built up SR20 boards with a third being built tonight and a fourth PCB to be built next week these are a multi board type which support S13,S14,S14 SR20, late Z32 and KA24DE ECUs. the same types of ECU that bikirom supports. but these are NVRAM like with the Z31 you ...

any more problems with this?

the other thing is that NVRAM can be sped up with map based updates to hopefully get close to the romulator speed. i've got it on my list as an optimisation once i've finished getting the latest hardware working (currently testing out CA18 and S14 SR20 ecus with our new board) single byte updates at...

i think i might have to do that.... was something i had thought about a while ago but forgot to do because as you mention it is possible to have a mismatch between image in the NVRAM/romulator and the currently selected image in nistune (remembering there are 5 images possible to be loaded) what can...

good stuff

yep use an earlier address file. the address updates are really only for the NIStune board firmware updates which affect Z31/R31 currently

There is another update 0.9071a due to time trials expiring

The only fix for this currently is the trail maptracing is fixed up.