Nistune Forums

Try a Z32 maf or the IPX maf. Or do what I did and buy a AEM lol.

I suppose I could test it with one of my S14 logs and see what it did since I was on the dyno at the time.

Did you adjust the K and latency? I know on mine with the SARD injectors I had to do a lot of adjustments to the K to get my A/F right. Also had to turn the 02 off and change the lower part of the map till I got it right then set the map back to normal and turn on the 02. See this setting the map b...

Did you adjust the K and latency? I know on mine with the SARD injectors I had to do a lot of adjustments to the K to get my A/F right. Also had to turn the 02 off and change the lower part of the map till I got it right then set the map back to normal and turn on the 02.

Is the ecu getting the speed signal? I thought mine was cutting out @ anything over 14psi but I remembered that I didn't have my spedo hooked up. It totally shut my car down when the boost was set higher.

Just splice in the Zietronixs narrow band out put to the stock 02 sensor. I had to do more than just uncheck the 02 feed back to get mine right.

Did you try and adjust the K with the 02 feed back turned off? I had to kill the 02 feed back switch and change the lower part of my map so it wasn't a flagged area any more before I could get the A/F to match the targets set on the nistune window. I put them back to normal after I was done and my A...

Looks like you hit 21 deg after the shift from 2nd to 3rd. just for a sec or so. Your A/F isn't too bad looks safe to me.

STU how much are you going to charge for the launch control? and rev limiter? I'm planning on buying the tuner licenses and a base image programmer in a few months. Do I send them to you? Mostly interested in the rev limiter control for the ODB1 B13's out here and ODB2. The ODB1's use the same ecu a...

any good news?

how goes it.

Torque wrote:Hi ..

There is no cold start signal, just the ECU listening on the temperature sensor.
There is a cranking signal though ...

Is the ECU reading the temperature correctly?

Sorry meant start signal. Yes temps are showing correctly.

Come to think of it my car gives me hell when ever I try to start it for the 1st time. 800cc sard top feed injectors on the RB20 ecu. I have to hold the throttle down when it's cranking to get it to fire up. I'm not 100% I'm getting a cold start signal even tho my friend that did the harness said he...

PL wrote:I'll bring my wishlist around on the weekend!

PL

LoL

*bump* things looking like you will be able to work on it in Nov-Dec Matt?