Nistune Forums

Very interesting. I got same problems on my RB25DET. It seems to work fine cold. As it warms up tit is like 1 cylinder not working. from 2500 to 5000 RPM at 5000 everything becomes better and at 6000 the car runs as it should at 6000 =) AFR readings was as you describe - lean. I've did some adustmen...

Really interesting if we can have knock monitoring inside nistune.

Thx matt.
And what board is proven to work better? or it doesn't matter?
Type 2 or Type 3

attached is our rom file.
Address file is P10 SR20DE 1993 70JXX.
We have no speed limit in nistune that can be customized but we want to cut off speed limit. If we cut speed wire to ECU (ecu dont see speed sensor) car drive realy bad.

The speed is cut on 186. We get to this speed just after we pass the finish of 402 meters.

We got Primera p10 1993 according to address file.

I'm nit truly shure but you can get around 320-350 HP at the wheels at stock fuel pressure. If you rise fuel pressure you can get more. This is valid if your stock 10-15 years old injectors are in exelent condition, which is almost a dream, i'm sure they are not so fresh as they were before.

Hello.
We are happy with nistune but one feature is not avaliable in our rom - speed limit. Is there any option to software cut speed limit on type 3 board with P10 rom?

So i found some info on Z32 ECU's For TT MT 23710- 41P01 (89/07 - 89/08) 23710- 41P02 (89/08 - 89/11) 23710- 41P03 (89/11 - 90/08) 23710- 41P04 (90/08 - 92/08) 23710- 46P60 (92/08 - 93/09) 23710- 48P71 (93/09 - 94/10) 23710- 51P60 (94/10 -) For TT AT 23710- 41P11 (89/07 - 89/08) 23710- 41P12 (89/08 ...

Matt

Can you specify known Part number mask?

Because sometimes its hard to findout CPU year and only ECU part number is known

4*P1* ?
Or only 41P*

Thats because I've uncheked "Install Innovate wideband support" During instalation.

Hello.
How do i use LC-1 with nistune?
When i go to File->Configurations
There are two drop-down selects with the selection of wideband. But there is no Innovate LC-1 in the list.
Please help.

There ara alot of ECU's part numbers on Z32.
Can you specify wich are good for ECR33 on Z32 Ecu setup?

Red alot of forum threads and recheked my ECU jumpers. Thats fixed the problem.

Everything seems works when i redone jumpers to CJ2 and installed new version of nisute.

The problem was due to ECU works on internal maps.

Hello everyone, especialy nistune support. Recently i ordered a nistune type 3 board for my primera P10 94-95 JDM I've downloaded my rom. And it was not like any others nistune saw. Finaly they say its most common to G20-P10 infinity. Upon recieving my board ive installed it and my car runs fine. Bu...

Hello.
Is there a difference wich z32 ECU i will get to use in my ECR33 auto/manual tyrbo/na? Or as far as we program the board with ECR33 in file this things doesnt matter?
Thx.