Search found 40 matches
- Thu Aug 28, 2014 12:20 am
- Forum: Type 2
- Topic: Neutral Switch
- Replies: 8
- Views: 3093
Re: Neutral Switch
Reviving an old thread as its my next task to tackle as i just left it disconnected before, the nuetral switch when doing some mapping we noticed the cold start crank tables warm start etc were locked out as the car just thinks its always in gear, so starting the car in different temps it can play u...
Re: LC-1
Hi matt thanks again for the reply, once again very usefull, ill let you know how we get on
LC-1
Hello there guys got the wideband on the car today, set the wideband config in the settings to the correct folder and on the right hand side selected innovate and the com port it was on, nistune could see the wideband but it didnt seem to be getting any data. but the innovate software was getting da...
- Fri Sep 06, 2013 6:32 pm
- Forum: Type 2
- Topic: Neutral Switch
- Replies: 8
- Views: 3093
Re: Neutral Switch
Ok PL thanks for the reply i will disconnect it as searching the loom for a break or a dodgey switch itself is a pain in the ass to fix haha
thanks Mike
thanks Mike
- Thu Sep 05, 2013 10:23 am
- Forum: Type 2
- Topic: Neutral Switch
- Replies: 8
- Views: 3093
Neutral Switch
Heya guys we know what the problem is and are looking in to it as we speak whether it is a bad wire or the switch itself is broken but; my question is when driving around we noticed that the neutral switch is falshing on and off on and off (you get the idea) it can be on and off constantly or someti...
- Thu Aug 15, 2013 10:58 pm
- Forum: Type 2
- Topic: VTC settings on RB25DET / z32 ECU
- Replies: 5
- Views: 3852
Re: VTC settings on RB25DET / z32 ECU
Ok great matt cheers for the v3 looking forward to using this on the car, are there any other changes to the map other than the vct settings???
Thanks Matt
Thanks Matt
- Wed Aug 14, 2013 5:14 am
- Forum: Type 2
- Topic: Battery readings
- Replies: 5
- Views: 2097
Re: Battery readings
Ok thanks guys, some very good replys i shall test what you said matt and go from there
- Mon Aug 12, 2013 2:45 am
- Forum: Type 2
- Topic: Battery readings
- Replies: 5
- Views: 2097
Re: Battery readings
i have looked and every earth i could possibly see i cleaned and gave it a bit of light sandpaper attention, but the harness is still new to me so it is a possibility
- Mon Aug 12, 2013 12:47 am
- Forum: Type 2
- Topic: VTC settings on RB25DET / z32 ECU
- Replies: 5
- Views: 3852
Re: VTC settings on RB25DET / z32 ECU
The factory settings are 1050 in and 4900 out thats what mine is set at and tp60
- Mon Aug 12, 2013 12:28 am
- Forum: Type 2
- Topic: Battery readings
- Replies: 5
- Views: 2097
Battery readings
Hello there, had the nistune for a while to run my rb25det in my s13 am so happy with it, the control you have :) but one thing we have noticed is that if you put the multimeter direct on to the battery it reads over 14v which is good but in the nistune software the battery charge is jumping between...